Beat Laundry Frustrations! Discover The Easiest Way To Drain Samsung Vrt Washers

If you’re facing a waterlogged Samsung VRT washer, don’t panic. Draining the washer is a straightforward process that can be completed in a few simple steps. This comprehensive guide will equip you with the knowledge and techniques to effectively drain your Samsung VRT washer, ensuring a swift return to pristine operation.

Safety Precautions

Before embarking on any maintenance task, it’s crucial to prioritize safety. Ensure the washer is unplugged from the power source and the water supply is shut off. Allow the washer to cool down completely if it has been recently used.

Step 1: Locate the Drain Filter

The drain filter is typically located at the bottom right corner of the washer’s front panel. It’s usually concealed behind a small access panel.

Step 2: Open the Drain Filter

Remove the access panel by gently prying it open with a flathead screwdriver or a coin. Inside, you’ll find the drain filter, which is a cylindrical or rectangular plastic piece.

Step 3: Remove the Drain Filter

Carefully grasp the drain filter and pull it straight out. Be prepared for a small amount of water to leak out.

Step 4: Clean the Drain Filter

Inspect the drain filter for any debris, such as lint, hair, or coins. Remove any obstructions by hand or using a pair of pliers. Rinse the filter thoroughly with clean water.

Step 5: Reinsert the Drain Filter

Align the drain filter with the opening and push it back in until it clicks into place. Ensure it’s securely fastened to prevent leaks.

Step 6: Drain the Water

Place a shallow pan or bucket under the drain hose, which is located at the back of the washer. Gently pull out the drain hose and allow the water to flow into the container.

Step 7: Reset the Washer

Once all the water has drained, reinsert the drain hose and close the access panel. Plug the washer back into the power source and turn on the water supply. Run a short rinse cycle to clear any residual water from the washer.

How to Drain a Samsung VRT Washer When the Filter is Clogged

If the drain filter is severely clogged and cannot be easily removed, you may need to access the washer’s internal drain pump.

1. Unplug the washer and turn off the water supply.
2. Tilt the washer back slightly and place it on its side.
3. Remove the bottom panel of the washer by unscrewing the screws.
4. Locate the drain pump, which is usually a black or gray cylinder at the bottom of the washer.
5. Disconnect the hoses and wires connected to the drain pump.
6. Remove the drain pump by unscrewing the mounting bolts.
7. Clean the drain pump and impeller of any debris.
8. Reassemble the drain pump and reconnect the hoses and wires.
9. Replace the bottom panel of the washer and plug it back in.

How to Drain a Samsung VRT Washer Without a Drain Hose

If the drain hose is damaged or missing, you can use the emergency drain tube to drain the washer.

1. Unplug the washer and turn off the water supply.
2. Open the access panel at the bottom of the washer.
3. Pull out the emergency drain tube, which is usually a red or orange hose.
4. Place a shallow pan or bucket under the end of the drain tube.
5. Allow the water to drain into the container.
6. Once all the water has drained, reinsert the emergency drain tube and close the access panel.

How to Drain a Samsung VRT Washer with a Drain Pump Error

If the washer displays a drain pump error, it means the drain pump is not working properly. You may need to replace the drain pump to resolve the issue.

1. Unplug the washer and turn off the water supply.
2. Follow the steps outlined in “How to Drain a Samsung VRT Washer When the Filter is Clogged” to access the drain pump.
3. Disconnect the hoses and wires connected to the drain pump.
4. Remove the drain pump by unscrewing the mounting bolts.
5. Install the new drain pump and reconnect the hoses and wires.
6. Replace the bottom panel of the washer and plug it back in.

Tips for Preventing Clogged Drains

• Clean the drain filter regularly to remove lint and debris.
• Use a drain cleaner specifically designed for washing machines every few months.
• Avoid overloading the washer.
• Check the pockets of clothes for any loose items before washing.

Last Resort: Calling for Professional Help

If you’ve tried all the troubleshooting steps above and still cannot drain your Samsung VRT washer, it’s time to call for professional help. A qualified appliance technician can diagnose and resolve the issue effectively.

Top Questions Asked

Q: How often should I clean the drain filter?
A: It’s recommended to clean the drain filter every 3-6 months to prevent clogs.

Q: What causes a drain pump error?
A: A drain pump error can be caused by a clogged drain pump, a faulty drain pump, or a problem with the washer’s electronic control board.

Q: Can I use a drain cleaner to unclog the washer?
A: Yes, but it’s important to use a drain cleaner specifically designed for washing machines. Avoid using harsh chemicals or bleach.

Q: Why is my washer not draining all the water?
A: The drain filter may be clogged, the drain hose may be kinked or damaged, or the drain pump may be faulty.

Q: How do I reset the washer after draining it?
A: Run a short rinse cycle to clear any residual water from the washer.