Step-By-Step Guide: How To Drain Excess Water From Your Lg Washer

If you’re facing a flooded laundry room due to a malfunctioning LG washing machine, don’t panic! Draining the excess water is a relatively straightforward task that you can handle yourself with a little guidance. This comprehensive guide will walk you through the process of draining LG washing machine water, ensuring your laundry routine resumes smoothly.

Safety First!

Before you begin, ensure your safety by:

• Unplugging the washing machine from the power outlet.
• Turning off the water supply to the machine.
• Wearing gloves to protect your hands from any sharp edges.

Locate the Drain Hose and Drain Pump Filter

1. Drain Hose: The drain hose is typically located at the back or bottom of the washing machine. It’s a flexible, corrugated hose that connects to the drainpipe.
2. Drain Pump Filter: The drain pump filter is usually located behind a small panel at the front or bottom of the machine. It traps debris that can clog the drain hose.

Drain the Water from the Drain Hose

1. Place a shallow pan or bucket under the drain hose.
2. Carefully pull the drain hose out of its holder.
3. Allow the water to drain into the pan or bucket.
4. Once the water stops flowing, reattach the drain hose securely.

Clean the Drain Pump Filter

1. Open the panel covering the drain pump filter.
2. Unscrew the filter and remove it.
3. Clean any debris or hair from the filter and the filter housing.
4. Reinstall the filter and tighten it securely.
5. Close the panel.

Drain the Remaining Water from the Machine

1. Place a large bowl or bucket under the washing machine.
2. Tilt the machine back slightly to allow the remaining water to drain out.
3. Use a sponge or towel to soak up any remaining water.

Reset the Washing Machine

1. Plug the washing machine back into the power outlet.
2. Turn on the water supply.
3. Start a rinse cycle to flush out any residual water.

Inspect for Leaks

1. Run a full wash cycle.
2. Check for any leaks around the drain hose, drain pump filter, or any other part of the machine.
3. If you find any leaks, contact an LG appliance repair technician.

Troubleshooting Tips

• Water not draining from drain hose: Check if the hose is kinked or obstructed. Clean the drain pump filter.
• Water not draining from machine: Tilt the machine back further to drain the remaining water.
• Machine won’t spin after draining: The spin cycle may be disabled due to an unbalanced load. Redistribute the laundry and try again.

Wrapping Up

Draining LG washing machine water is a simple task that can be completed in a few easy steps. By following the instructions outlined in this guide, you can quickly resolve the issue and get your laundry back on track. Remember, if you encounter any difficulties or suspect a more serious problem, don’t hesitate to consult an LG appliance repair professional.

Frequently Asked Questions

Q: Why is my LG washing machine not draining?
A: Clogged drain hose or drain pump filter, unbalanced load, or faulty drain pump.

Q: How do I reset my LG washing machine after draining?
A: Plug the machine back in, turn on the water supply, and start a rinse cycle.

Q: Can I drain my LG washing machine without a drain hose?
A: Yes, you can tilt the machine back to drain the water into a bucket. However, this method is not recommended for large amounts of water.

Q: How often should I clean the drain pump filter?
A: Every 3-6 months, or more frequently if you notice reduced water flow.

Q: What if I find a leak after draining the washing machine?
A: Contact an LG appliance repair technician immediately to prevent further damage.