Unclog Your Lg Top-Load Washer: The Ultimate Diy Guide
What To Know
- Look behind the washer for a flexible hose connected to a drainpipe or standpipe.
- Once the drain hose and filter are clean, reconnect the hose to the drainpipe or standpipe.
- If the drain hose is clogged with a major obstruction, consider using a drain snake to clear it.
If your LG top-load washer has become a stagnant pool of laundry, draining is essential to restore its functionality. Follow this comprehensive guide to learn how to drain LG washer top load and get your laundry back on track.
Understanding Your LG Top-Load Washer
Before delving into the drainage process, it’s crucial to understand the anatomy of your LG top-load washer. Locate the following key components:
- Drain hose: A flexible tube that carries wastewater from the washer to the drain.
- Drain pump: A motor that forces water through the drain hose.
- Filter: A screen that traps debris and prevents it from clogging the pump.
Step-by-Step Drainage Instructions
1. Unplug the Washer
Safety first! Unplug the washer from the electrical outlet to avoid any potential hazards.
2. Locate the Drain Hose
Look behind the washer for a flexible hose connected to a drainpipe or standpipe. This is the drain hose.
3. Place a Shallow Pan or Bucket Underneath
Position a shallow pan or bucket beneath the drain hose to collect the wastewater.
4. Disconnect the Drain Hose
Carefully disconnect the drain hose from the drainpipe or standpipe. Water may start flowing out, so be prepared.
5. Clean the Drain Hose and Filter
Inspect the drain hose for any clogs or debris. Use a flashlight to look inside and remove any visible obstructions. Clean the filter located at the end of the drain hose as well.
6. Reconnect the Drain Hose
Once the drain hose and filter are clean, reconnect the hose to the drainpipe or standpipe. Ensure a secure connection.
7. Plug the Washer Back In
Plug the washer back into the electrical outlet.
8. Run the Drain Cycle
Select the “Drain” or “Spin Only” cycle on your washer. This will activate the drain pump and force out any remaining water.
Troubleshooting Common Drainage Issues
1. Washer Won’t Drain
- Check if the drain hose is kinked or clogged.
- Ensure the filter is clean.
- Inspect the drain pump for obstructions.
2. Washer Drains Slowly
- Clean the drain hose and filter.
- Check if the drainpipe or standpipe is clogged.
- Contact LG support for further assistance.
3. Water Leaking from Drain Hose
- Tighten the connection between the drain hose and drainpipe.
- Check for any cracks or damage to the drain hose.
- Replace the drain hose if necessary.
Advanced Drainage Techniques
1. Using a Drain Snake
If the drain hose is clogged with a major obstruction, consider using a drain snake to clear it. Insert the snake into the drain hose and gently push it through to remove the blockage.
2. Resetting the Washer
In some cases, resetting the washer can resolve drainage issues. Unplug the washer, wait for a few minutes, and then plug it back in.
Wrapping Up
By following these steps, you can effectively drain LG washer top load and restore its functionality. Remember to clean the drain hose and filter regularly to prevent future clogs. If you encounter any persistent drainage issues, don’t hesitate to contact LG support for professional assistance.
Questions You May Have
Q: How often should I clean the drain hose and filter?
A: It’s recommended to clean the drain hose and filter every few months or as needed.
Q: Can I use bleach to clean the drain hose?
A: No, do not use bleach to clean the drain hose. It can damage the hose and cause leaks.
Q: What if my washer still won’t drain after following these steps?
A: Contact LG support for further troubleshooting and repair options.