Drain Your Dishwasher With Just A Knob: The Easiest Method Revealed!
What To Know
- Fortunately, draining a GE dishwasher with a knob is a relatively simple task that you can do yourself.
- Place a shallow pan or bucket under the dishwasher to catch the water that will drain out.
- There could be several reasons why your GE dishwasher is not draining, including a kinked or clogged drain hose, a faulty drain pump, or a damaged door gasket.
If your GE dishwasher isn‘t draining properly, it can leave you with a sink full of dirty dishes and a headache. Fortunately, draining a GE dishwasher with a knob is a relatively simple task that you can do yourself. In this comprehensive guide, we’ll walk you through the step-by-step process of draining your GE dishwasher with a knob, including troubleshooting tips and frequently asked questions.
Materials You’ll Need
- Shallow pan or bucket
- Sponge or towels
- Screwdriver (optional)
Step-by-Step Instructions
1. Unplug the Dishwasher
Safety first! Before you begin, unplug the dishwasher from the electrical outlet.
2. Open the Dishwasher Door
Open the dishwasher door to allow access to the drain.
3. Locate the Drain Knob
The drain knob is typically located at the bottom of the dishwasher, near the front. It’s usually a small, white knob.
4. Turn the Drain Knob
Turn the drain knob counterclockwise to open the drain. You’ll hear a clicking sound as the drain opens.
5. Place a Pan or Bucket Under the Dishwasher
Place a shallow pan or bucket under the dishwasher to catch the water that will drain out.
6. Wait for the Dishwasher to Drain
The dishwasher will drain the water into the pan or bucket. This may take a few minutes.
7. Close the Drain Knob
Once the dishwasher has finished draining, turn the drain knob clockwise to close it.
8. Wipe Up Any Spilled Water
Use a sponge or towels to wipe up any water that may have spilled during the draining process.
Troubleshooting Tips
- No Water Draining: If the dishwasher isn’t draining any water, check if the drain hose is kinked or clogged. You may need to remove the drain hose and clean it out.
- Water Not Draining Completely: If the dishwasher isn’t draining completely, the drain pump may be faulty. You may need to replace the drain pump.
- Leaking Dishwasher: If the dishwasher is leaking water, check the door gasket for any tears or damage. You may need to replace the door gasket.
Wrap Up: Dishwasher Draining Done Right
Congratulations! You’ve successfully drained your GE dishwasher with a knob. By following these simple steps, you can keep your dishwasher running smoothly and avoid messy dishwashing disasters.
Information You Need to Know
Q: Why is my GE dishwasher not draining?
A: There could be several reasons why your GE dishwasher is not draining, including a kinked or clogged drain hose, a faulty drain pump, or a damaged door gasket.
Q: Can I use a wet/dry vacuum to drain my dishwasher?
A: Yes, you can use a wet/dry vacuum to drain your dishwasher. However, it’s important to use the vacuum’s wet setting and to be careful not to suck up any water into the vacuum’s motor.
Q: How often should I clean the drain hose on my GE dishwasher?
A: It’s recommended to clean the drain hose on your GE dishwasher every 3-6 months to prevent clogs and ensure proper drainage.
