Save Time And Money: How To Drain Your Dishwasher Manually Without Calling A Technician

If your GE dishwasher seems to be holding onto water like a stubborn child, it’s time to take matters into your own hands and drain it manually. This simple yet effective technique will help you restore your dishwasher to its pristine, dishwashing glory.

Why Drain Your Dishwasher Manually?

There are several reasons why you may need to drain your GE dishwasher manually:

• Clogged drain hose or filter
• Power outage
• Malfunctioning drain pump
• Overflowing dishwasher

Safety First: Unplug and Turn Off Water

Before you embark on this draining adventure, always unplug your dishwasher and turn off the water supply. This ensures your safety and prevents any unnecessary water damage.

Locate the Drain Hose

The drain hose is typically located at the bottom of the dishwasher, near the back. It’s usually a black or gray hose connected to a drainpipe.

Detach the Drain Hose

Using a pair of pliers, loosen the clamp that secures the drain hose to the drainpipe. Gently pull the drain hose away from the pipe.

Drain the Water

Place a bucket or large container under the drain hose to catch the water. Tilt the dishwasher backward slightly to facilitate the draining process. Be patient, as it may take a few minutes for all the water to drain out.

Reattach the Drain Hose

Once the water has been drained, reattach the drain hose to the drainpipe. Tighten the clamp securely using the pliers.

Clear Clogs

If your dishwasher was clogged, now is the time to remove any debris that may be blocking the drain hose or filter. Use a flashlight to inspect the hose and filter for any visible obstructions. If you find any, carefully remove them.

Reset the Dishwasher

Once the clog has been cleared, plug your dishwasher back in and turn on the water supply. Run a short cycle to test if the draining issue has been resolved.

Other Potential Causes of Dishwasher Draining Issues

If manually draining your dishwasher doesn‘t solve the problem, there may be other underlying causes:

• Faulty drain pump: The drain pump is responsible for pumping water out of the dishwasher. If it’s malfunctioning, it can prevent the dishwasher from draining properly.
• Clogged air gap: The air gap is a small device located near the sink that prevents water from flowing back into the dishwasher. If it’s clogged, it can cause drainage problems.
• Malfunctioning control panel: The control panel controls the various functions of the dishwasher, including the draining process. If it’s malfunctioning, it may not send the correct signals to the drain pump.

When to Call a Professional

While manually draining your GE dishwasher is a relatively simple task, there are times when it’s best to call a professional. If you encounter any of the following issues, it’s advisable to seek professional assistance:

• Persistent draining problems
• Unusual noises or vibrations during draining
• Water leaking from the dishwasher

Answers to Your Most Common Questions

• How often should I drain my GE dishwasher manually?

You don’t need to drain your dishwasher manually on a regular basis. However, if you experience any drainage issues, manual draining can be a quick and effective solution.

• Can I use a wet/dry vacuum to drain my dishwasher?

Yes, you can use a wet/dry vacuum to drain your dishwasher. Simply attach the vacuum hose to the drain hose and turn on the vacuum. Be sure to use the appropriate setting for water removal.

• What should I do if I can’t find the drain hose?

If you can’t locate the drain hose, consult your dishwasher’s user manual or contact GE customer support for assistance.