Diy Dryer Disassembly: A Beginner’S Guide To Fixing Your Broken Kenmore

Are you faced with the daunting task of disassembling your Kenmore dryer? Whether it’s for repairs, maintenance, or simply relocation, this guide will empower you with the step-by-step instructions you need. Follow along as we delve into the intricacies of Kenmore dryers, providing you with a comprehensive roadmap to a successful disassembly.

Safety Precautions

Before embarking on this disassembly journey, prioritize safety:

• Unplug the dryer from its power source.
• Allow the dryer to cool down completely.
• Wear appropriate safety gear, such as gloves and safety glasses.

Materials and Tools

Gather the necessary tools and materials:

• Screwdriver set (Phillips and flathead)
• Socket wrench
• Putty knife
• Flashlight
• Towels or rags

Step-by-Step Disassembly Guide

1. Remove the Top Panel

• Locate the screws at the back of the top panel.
• Remove the screws and carefully lift the top panel upwards.
• Set aside the top panel in a safe place.

2. Disconnect the Control Panel

• Locate the wire harness connected to the control panel.
• Unplug the wire harness by pressing the release tab.
• Remove the screws holding the control panel in place.
• Carefully remove the control panel.

3. Detach the Lint Trap Assembly

• Pull out the lint trap.
• Remove the screws securing the lint trap assembly.
• Slide the lint trap assembly out.

4. Remove the Front Panel

• Open the dryer door.
• Remove the screws along the outer edge of the front panel.
• Gently tilt the front panel forward and lift it off the dryer.

5. Disconnect the Drum

• Locate the belt connecting the drum to the motor.
• Use a socket wrench to loosen the tensioner pulley and remove the belt.
• Remove the screws securing the drum to the frame.
• Carefully pull the drum out of the dryer.

6. Remove the Motor

• Locate the screws holding the motor in place.
• Disconnect the wires connected to the motor.
• Remove the motor from the dryer.

7. Remove the Heating Element

• Locate the heating element at the back of the dryer.
• Disconnect the wires connected to the heating element.
• Use a putty knife to gently pry the heating element out of the dryer.

Reassembly

Once you have completed your repairs or maintenance, reassemble the dryer in reverse order of disassembly. Ensure that all connections are secure and that the dryer is properly grounded.

Troubleshooting

My dryer is not tumbling.

• Check if the belt is broken or loose.
• Inspect the motor for any damage.
• Ensure that the drum is properly seated.

My dryer is not heating.

• Check if the heating element is damaged.
• Inspect the wires connected to the heating element.
• Ensure that the thermostat is functioning correctly.

My dryer is making a loud noise.

• Check if the drum is rubbing against the dryer frame.
• Inspect the bearings for any wear or damage.
• Ensure that the motor is properly mounted.

Information You Need to Know

How long does it take to disassemble a Kenmore dryer?

• The disassembly time can vary depending on your skill level, but it typically takes around 2-3 hours.

Can I disassemble my Kenmore dryer myself?

• Yes, it is possible to disassemble your Kenmore dryer yourself by following the steps outlined in this guide. However, if you are not comfortable working with electrical appliances, it is recommended to consult a qualified technician.

What are the most common problems with Kenmore dryers?

• Common problems include broken belts, faulty heating elements, and worn bearings.