How To Clean A Whirlpool Washer Pump Filter: Unblock Your Washer’S Flow!

Facing drainage issues with your Whirlpool washer? Chances are, the pump filter needs some attention. Cleaning the pump filter is a crucial maintenance task that ensures your washer operates efficiently and prevents costly repairs. This detailed guide will walk you through the step-by-step process of cleaning the Whirlpool washer pump filter, empowering you to tackle this task with confidence.

Gather Your Tools

Before you begin, gather the following tools:

• Flat-head screwdriver or coin
• Rag or sponge
• Flashlight (optional)

Locating the Pump Filter

1. Unplug the washer from the power source.
2. Open the lower front panel by pulling it towards you.
3. Locate the pump filter behind the access panel. It is typically a small, round or rectangular component with a black or white cap.

Removing the Pump Filter

1. Place a rag or sponge under the pump filter to catch any water that may drain out.
2. Using a flat-head screwdriver or coin, carefully pry open the pump filter cap.
3. Gently pull out the pump filter, which may contain debris or lint.

Cleaning the Pump Filter

1. Inspect the pump filter for any visible debris or blockages.
2. Use a rag or sponge to wipe away any loose lint or hair.
3. If the filter is heavily clogged, use a flashlight to illuminate the inside and remove any hidden debris.
4. Rinse the pump filter thoroughly under running water.

Reinstalling the Pump Filter

1. Ensure the pump filter is clean and free of debris.
2. Align the filter with the pump housing and gently push it back into place.
3. Tighten the pump filter cap securely using the screwdriver or coin.

Resetting the Washer

1. Close the lower front panel.
2. Plug the washer back into the power source.
3. Run a short wash cycle to ensure the washer is functioning properly.

Troubleshooting

If you encounter any issues during or after cleaning the pump filter, here are some troubleshooting tips:

• Water leaking from the pump filter: Ensure the filter is properly tightened and the cap is securely in place.
• Washer still not draining: Check the drain hose for kinks or blockages.
• Error code displayed: Refer to the washer’s user manual for the specific error code and follow the troubleshooting instructions.

Regular Maintenance

To prevent future drainage problems, it is recommended to clean the pump filter regularly, especially if you notice any signs of clogging. Aim to clean the filter every 3-6 months or more frequently if you frequently wash large or heavily soiled loads.

Recommendations

Cleaning the Whirlpool washer pump filter is a simple and essential maintenance task that can significantly improve the efficiency and lifespan of your appliance. By following the steps outlined in this guide, you can keep your washer running smoothly and avoid costly repairs. Remember to clean the filter regularly and address any issues promptly to ensure optimal performance.