Unclog Your Whirlpool Washer’S Drain Hose In Minutes: A Step-By-Step Guide
What To Know
- It’s a black or gray hose that runs from the bottom of the washer to the drain pipe.
- If the blockage is larger, you may need to use a drain snake or a wet/dry vacuum to remove it.
- You should clean the drain hose on your Whirlpool washer every 6-12 months, or more often if you have a lot of lint or pet hair in your laundry.
A clogged drain hose can cause a variety of problems for your Whirlpool washer, including slow draining, leaks, and even flooding. If you’re experiencing any of these issues, it’s important to clean the drain hose as soon as possible.
Tools and Materials You’ll Need
- Bucket or container
- Rags or towels
- Screwdriver
- Pliers
- Flashlight
Step-by-Step Instructions
1. Unplug the Washer
Before you begin cleaning the drain hose, be sure to unplug the washer from the power outlet. This will help prevent any electrical accidents.
2. Locate the Drain Hose
The drain hose is typically located at the back of the washer. It’s a black or gray hose that runs from the bottom of the washer to the drain pipe.
3. Disconnect the Drain Hose
Use a screwdriver to loosen the clamp that’s holding the drain hose in place. Once the clamp is loose, you can pull the drain hose off the drain pipe.
4. Inspect the Drain Hose
Once the drain hose is disconnected, inspect it for any blockages. You may be able to see the blockage with a flashlight. If you can’t see the blockage, you can try running a wire hanger through the hose to dislodge it.
5. Clean the Drain Hose
If the blockage is small, you may be able to clean it out with a rag or towel. If the blockage is larger, you may need to use a drain snake or a wet/dry vacuum to remove it.
6. Reattach the Drain Hose
Once the drain hose is clean, reattach it to the drain pipe. Be sure to tighten the clamp securely.
7. Run a Test Cycle
Once the drain hose is reattached, run a test cycle to make sure it’s working properly. If the washer drains properly, you’re all set!
Additional Tips
- If you have a Whirlpool washer with a built-in drain filter, be sure to clean the filter regularly. This will help prevent clogs from forming in the drain hose.
- If you’re having trouble cleaning the drain hose yourself, you can call a qualified appliance repair technician for help.
Wrap-Up: Keep Your Whirlpool Washer Running Smoothly
By following these steps, you can easily clean the drain hose on your Whirlpool washer. This will help prevent clogs from forming and keep your washer running smoothly for years to come.
Frequently Asked Questions
Q: How often should I clean the drain hose on my Whirlpool washer?
A: You should clean the drain hose on your Whirlpool washer every 6-12 months, or more often if you have a lot of lint or pet hair in your laundry.
Q: What are the signs of a clogged drain hose?
A: The signs of a clogged drain hose include slow draining, leaks, and flooding.
Q: Can I use a bleach solution to clean the drain hose?
A: No, you should not use a bleach solution to clean the drain hose. Bleach can damage the hose and cause it to leak.