Transform Your Shark Navigator Pet: The Complete Guide To Keeping It Purring

Maintaining a clean and functioning vacuum cleaner is crucial for optimal performance and longevity. If you own a Shark Navigator Pet vacuum, regular cleaning is essential to ensure it continues to effectively remove pet hair, dirt, and debris from your home. This comprehensive guide will provide you with step-by-step instructions on how to clean your Shark Navigator Pet vacuum, ensuring it operates at its best.

Essential Tools for the Task

Before embarking on the cleaning process, gather the following tools:

• Soft cloth
• Brush attachment or upholstery tool
• Phillips screwdriver (optional)
• Dustpan (optional)
• New HEPA filter (recommended)

Step-by-Step Cleaning Instructions

1. Empty the Dust Cup

• Locate the dust cup release button on the back of the vacuum and press it.
• Remove the dust cup and empty its contents into a trash can.
• If necessary, use a dustpan to collect any remaining debris around the cup opening.

2. Clean the Filter

• Open the filter access door on the side of the vacuum.
• Remove the HEPA filter and shake it vigorously to dislodge any loose dirt or debris.
• If the filter is visibly dirty, replace it with a new one.
• Reinsert the filter into the vacuum and close the access door.

3. Remove the Brushroll

• Turn the vacuum upside down and locate the brushroll access panel.
• Use a Phillips screwdriver to remove the screws holding the panel in place.
• Carefully lift the panel and remove the brushroll.

4. Clean the Brushroll and Belt

• Use a brush attachment or upholstery tool to remove any hair or debris wrapped around the brushroll.
• Inspect the belt for any damage or wear. If necessary, replace the belt.

5. Clean the Floor Nozzle

• Use a soft cloth to wipe down the floor nozzle, removing any dirt or debris.
• Pay particular attention to the suction openings to ensure they are clear.

6. Clean the Exterior

• Use a soft cloth to wipe down the exterior of the vacuum, removing any dust or dirt.
• Avoid using harsh chemicals or abrasive cleaners that could damage the finish.

7. Reassemble the Vacuum

• Reinsert the brushroll into the vacuum and secure it with the screws.
• Place the floor nozzle back on the vacuum and ensure it is properly attached.
• Close the filter access door and dust cup.

Additional Maintenance Tips

• Clean the brushroll and filter regularly, especially if you have pets or use the vacuum frequently.
• Check the belt for wear and replace it if necessary.
• Empty the dust cup after each use to prevent it from becoming clogged.
• Store the vacuum in a clean and dry place when not in use.

Troubleshooting Common Issues

• Vacuum not picking up dirt: Check the brushroll, filter, and floor nozzle for any blockages.
• Vacuum making a loud noise: Inspect the brushroll for any hair or debris wrapped around it.
• Vacuum overheating: Allow the vacuum to cool down for a few minutes before using it again.

What You Need to Learn

1. How often should I clean my Shark Navigator Pet vacuum?

• Clean the dust cup after each use.
• Clean the filter and brushroll every 3-6 months.

2. Can I wash the HEPA filter?

• No, the HEPA filter is not washable. Replace it every 6-12 months.

3. Where can I purchase replacement parts for my Shark Navigator Pet vacuum?

• Replacement parts can be purchased from the Shark website or authorized retailers.

4. How do I know when to replace the belt?

• Inspect the belt for any cracks, tears, or stretching. Replace it if it shows signs of wear.

5. What is the best way to store my Shark Navigator Pet vacuum?

• Store the vacuum in a clean and dry place when not in use. Avoid exposing it to extreme temperatures or moisture.