Discover The Secrets: How To Effortlessly Clean Your Shark Navigator Lift-Away Canister

Maintaining the cleanliness of your Shark Navigator Lift-Away Canister is crucial for ensuring optimal performance and longevity. By following a regular cleaning routine, you can prevent dirt and debris from accumulating, which can lead to reduced suction power, unpleasant odors, and even breakdowns. This comprehensive guide will provide you with step-by-step instructions on how to clean your Shark Navigator Lift-Away Canister effectively and efficiently.

Removing the Dirt Tank

1. Unplug the canister from the power outlet.
2. Locate the dirt tank release button at the top of the canister.
3. Press the release button and lift the dirt tank straight up.

Emptying the Dirt Tank

1. Hold the dirt tank over a trash can.
2. Press the bottom release button to open the bottom door of the tank.
3. Allow all the dirt and debris to fall out completely.
4. Close the bottom door securely.

Cleaning the Dirt Tank

1. Rinse the dirt tank thoroughly with clean water.
2. Use a soft cloth or sponge to wipe away any remaining dirt or debris.
3. Allow the dirt tank to air dry completely before reattaching it to the canister.

Cleaning the Pre-Motor Filter

1. Open the pre-motor filter compartment on the side of the canister.
2. Remove the pre-motor filter and gently shake off any loose dirt.
3. Rinse the pre-motor filter under cold water until the water runs clear.
4. Squeeze out any excess water from the filter and allow it to air dry completely.

Cleaning the HEPA Filter

1. Open the HEPA filter compartment on the back of the canister.
2. Remove the HEPA filter and gently shake off any loose dirt.
3. Use a vacuum cleaner to remove any remaining dust or debris from the filter.
4. Do not wash the HEPA filter with water.
5. Reinsert the HEPA filter into the compartment and close the door securely.

Cleaning the Brushroll

1. Turn the canister upside down.
2. Use a screwdriver or coin to remove the brushroll cover.
3. Remove the brushroll and carefully remove any hair, thread, or debris wrapped around it.
4. Clean the brushroll housing with a damp cloth to remove any dirt or debris.
5. Reinsert the brushroll into the housing and replace the cover.

Reassembling the Canister

1. Place the dirt tank back onto the canister and press down until it clicks into place.
2. Insert the pre-motor filter into its compartment and close the door.
3. Insert the HEPA filter into its compartment and close the door.
4. Plug the canister back into the power outlet.

Additional Cleaning Tips

• Clean the dirt tank after every use to prevent odors and maintain suction power.
• Clean the pre-motor filter every 3-6 months, or more often if you have pets or use the vacuum frequently.
• Clean the HEPA filter every 12-18 months, or more often if you have allergies or smoke in your home.
• Clean the brushroll every 6-12 months, or more often if you vacuum long hair or pet hair.
• Store the canister in a cool, dry place when not in use.

Wrapping Up: Maintaining Your Shark Navigator Lift-Away Canister

By following these cleaning instructions regularly, you can ensure that your Shark Navigator Lift-Away Canister operates at its best for years to come. A well-maintained vacuum cleaner will provide you with a clean and healthy home environment, while also saving you money on repairs and replacements. Remember to check your canister’s user manual for specific cleaning instructions and recommendations.

Questions We Hear a Lot

Q: How often should I clean my Shark Navigator Lift-Away Canister?
A: You should clean the dirt tank after every use, the pre-motor filter every 3-6 months, the HEPA filter every 12-18 months, and the brushroll every 6-12 months.

Q: What type of cleaning solution should I use to clean the dirt tank and pre-motor filter?
A: Use only mild dish soap and water to clean the dirt tank and pre-motor filter. Do not use bleach or harsh chemicals.

Q: Can I wash the HEPA filter with water?
A: No, you should not wash the HEPA filter with water. Use a vacuum cleaner to remove any dust or debris from the filter.