Maximize Your Rzr’S Airflow: A Comprehensive Guide To Cleaning Your S&B Air Filter

Maintaining a clean S&B air filter is crucial for the optimal performance of your RZR. Dirt and debris can accumulate over time, restricting airflow and reducing engine efficiency. Cleaning your air filter regularly will help ensure your RZR runs smoothly and efficiently. In this comprehensive guide, we will provide you with a step-by-step walkthrough on how to clean your S&B air filter RZR, ensuring your vehicle performs at its peak.

Step 1: Gather Your Materials

Before you begin, gather the following materials:

• S&B air filter cleaning kit
• Soft-bristled brush
• Clean rags or paper towels
• Bucket or large container
• Water
• Air compressor (optional)

Step 2: Remove the Air Filter

Locate the air filter housing on your RZR. It is typically situated near the engine. Unclip or unscrew the housing and carefully remove the air filter.

Step 3: Inspect the Air Filter

Inspect the air filter for any visible dirt, debris, or damage. If the filter is heavily soiled, it may need to be replaced. However, if it is only slightly dirty, it can be cleaned.

Step 4: Clean the Filter with a Soft Brush

Use the soft-bristled brush to gently remove any loose dirt or debris from the filter. Brush in the direction of the pleats to avoid damaging the filter.

Step 5: Soak the Filter in Cleaning Solution

Fill a bucket or large container with water and add the S&B air filter cleaning solution according to the manufacturer’s instructions. Submerge the filter in the solution and let it soak for the recommended time.

Step 6: Rinse the Filter Thoroughly

After soaking, rinse the filter thoroughly with clean water. Use a hose or bucket to remove all traces of the cleaning solution.

Step 7: Dry the Filter

Shake off any excess water from the filter. You can also use compressed air to blow out any remaining moisture. Allow the filter to air dry completely before reinstalling it.

Step 8: Reinstall the Air Filter

Once the filter is completely dry, reinstall it in the air filter housing. Secure the housing and ensure it is properly sealed.

Step 9: Check for Leaks

After reinstalling the air filter, start your RZR and let it run for a few minutes. Inspect the air filter housing for any leaks. If you notice any leaks, retighten the housing or consult a mechanic.

Tips for Maintaining Your S&B Air Filter

• Check the air filter regularly for dirt and debris, especially after riding in dusty conditions.
• Clean the air filter every 50-100 hours of riding, or more frequently if riding in extreme conditions.
• Use only the recommended S&B air filter cleaning solution. Other cleaners may damage the filter.
• If the air filter is damaged, replace it immediately to prevent engine damage.

Troubleshooting Common Problems

• Air filter is dirty but not restricting airflow: The filter may be clogged with fine dust particles. Use a compressed air hose to blow out the dust.
• Air filter is restricting airflow: The filter may be damaged or blocked by a large object. Replace or clean the filter as needed.
• Air filter is leaking: The air filter housing may not be properly sealed. Retighten the housing or consult a mechanic.

Information You Need to Know

1. How often should I clean my S&B air filter RZR?

Every 50-100 hours of riding, or more frequently if riding in extreme conditions.

2. What is the best way to clean my S&B air filter RZR?

Follow the step-by-step instructions provided in this guide.

3. Can I use other cleaners to clean my S&B air filter RZR?

No, only use the recommended S&B air filter cleaning solution.

4. How long should I soak my S&B air filter RZR in the cleaning solution?

Follow the manufacturer’s instructions, typically around 15-30 minutes.

5. Can I wash my S&B air filter RZR in a washing machine?

No, do not wash the air filter in a washing machine. This can damage the filter.