Say Goodbye To A Filthy Lg Washer: Step-By-Step Guide To Cleaning Your Inverter Direct Drive

Maintaining a clean LG washer inverter direct drive is crucial for its optimal performance and longevity. Neglecting regular cleaning can lead to unpleasant odors, mold growth, and reduced efficiency. This comprehensive guide will provide you with step-by-step instructions and essential tips on how to effectively clean your LG washer inverter direct drive.

Cleaning the Exterior

1. Unplug the Washer: Always unplug the washer before cleaning to prevent electrical hazards.

2. Wipe Down the Surface: Use a soft cloth dampened with warm water and mild detergent to wipe down the exterior surfaces of the washer, including the control panel, door, and lid.

3. Clean the Detergent Dispenser: Remove the detergent dispenser and soak it in a solution of warm water and vinegar for 30 minutes. Rinse thoroughly and replace.

Cleaning the Interior

1. Run a Tub Clean Cycle: Most LG washers have a built-in Tub Clean cycle that uses hot water and bleach to remove dirt and buildup. Follow the manufacturer’s instructions for running this cycle.

2. Manual Cleaning: If a Tub Clean cycle is unavailable, you can manually clean the interior using a mixture of 1 cup of bleach and 1 gallon of hot water. Pour the solution into the washer and let it agitate for 30 minutes before draining.

Cleaning the Filter

1. Locate the Filter: The filter is typically located at the bottom of the washer, accessible through a small door or panel.

2. Remove the Filter: Remove the filter and rinse it thoroughly under running water. Use a soft brush to remove any stubborn debris.

3. Reinstall the Filter: Once the filter is clean, reinstall it securely in its designated location.

Cleaning the Drain Pump

1. Locate the Drain Pump: The drain pump is usually located at the bottom of the washer behind a panel.

2. Remove the Drain Pump: Disconnect the hoses and remove the drain pump by unscrewing the bolts that hold it in place.

3. Clean the Drain Pump: Inspect the drain pump for any debris or blockages. Remove any obstructions and clean the pump using a soft brush and warm water.

4. Reinstall the Drain Pump: Once the drain pump is clean, reassemble and reinstall it, ensuring that all connections are secure.

Cleaning the Lint Trap

1. Locate the Lint Trap: The lint trap is usually located inside the washer drum, accessible through a small door or panel.

2. Remove and Clean: Remove the lint trap and empty it into a trash can. Use a soft brush or your fingers to remove any remaining lint.

3. Reinstall the Lint Trap: Once the lint trap is clean, reinstall it securely in its designated location.

Troubleshooting Common Issues

• Unpleasant Odors: Run a Tub Clean cycle or manually clean the interior with bleach and hot water.

• Mold Growth: Wipe down the washer with a vinegar solution and run a Tub Clean cycle regularly.

• Reduced Efficiency: Check if the filter or drain pump is clogged and clean accordingly.

What You Need to Learn

1. How often should I clean my LG washer inverter direct drive?

• It is recommended to clean the washer every 3-6 months, depending on usage frequency.

2. Can I use any type of bleach to clean my washer?

• Yes, but it is recommended to use chlorine bleach for optimal cleaning results.

3. What should I do if the Tub Clean cycle does not remove all the dirt and buildup?

• You can manually clean the interior using a bleach and hot water solution.

4. How can I prevent mold growth in my washer?

• Leave the washer door and lid open after each use to allow it to air out.

5. What are the signs of a clogged filter?

• Reduced water flow, unusual noises, or error codes.