How To Clean An Electrolux Drain Pump Filter And Avoid Costly Repairs

Is your Electrolux washing machine acting up? If it’s making strange noises, not draining properly, or leaking water, it could be a sign that the drain pump filter needs cleaning. Cleaning the drain pump filter is a relatively simple task that can be completed in a few minutes. Here’s a step-by-step guide to help you get started:

Gather Your Tools

Before you begin, you’ll need to gather a few tools:

• A flat-head screwdriver or coin
• A bucket or large bowl
• A few rags or towels

Locate the Drain Pump Filter

The drain pump filter is typically located at the bottom front of the washing machine, behind a small access panel. To locate the access panel, look for a small door or panel with a handle or latch.

Open the Access Panel

Once you’ve located the access panel, use the flat-head screwdriver or coin to open it. Be careful not to damage the panel or the surrounding area.

Remove the Drain Pump Filter

Once the access panel is open, you’ll see the drain pump filter. It’s usually a small, round or square filter that’s held in place by a few screws or clips. Remove the screws or clips and pull the filter out.

Clean the Drain Pump Filter

The drain pump filter is likely to be clogged with lint, hair, and other debris. Use your fingers to remove any large pieces of debris, then rinse the filter thoroughly with warm water. You can also use a soft brush to remove any stubborn dirt or grime.

Reinstall the Drain Pump Filter

Once the filter is clean, reinstall it in the washing machine. Make sure to tighten the screws or clips securely.

Close the Access Panel

Close the access panel and make sure it’s securely latched.

Run a Test Cycle

Once the drain pump filter is clean, run a test cycle to make sure the washing machine is draining properly.

Troubleshooting

If you’re still having problems with your Electrolux washing machine after cleaning the drain pump filter, there could be another issue. Here are a few troubleshooting tips:

• Check the drain hose for kinks or blockages.
• Make sure the washing machine is level.
• Check the water pressure to the washing machine.
• Call a qualified appliance repair technician.

Other Tips

Here are a few other tips for keeping your Electrolux washing machine in good working condition:

• Clean the lint filter after every load of laundry.
• Use a washing machine cleaner once a month to remove built-up detergent and fabric softener residue.
• Leave the washing machine door open after each load to air out the interior.
• Call a qualified appliance repair technician for regular maintenance and repairs.

In a nutshell: Keep Your Electrolux Running Smoothly

By following these simple steps, you can keep your Electrolux washing machine running smoothly for years to come. If you have any further questions or concerns, don’t hesitate to consult the user manual or contact a qualified appliance repair technician.

Information You Need to Know

Q: How often should I clean the drain pump filter in my Electrolux washing machine?
A: It’s a good idea to clean the drain pump filter every few months, or more often if you notice that your washing machine is not draining properly.

Q: What are some signs that the drain pump filter needs cleaning?
A: Some signs that the drain pump filter needs cleaning include strange noises, poor drainage, and water leaks.

Q: Can I use a vacuum cleaner to clean the drain pump filter?
A: No, it’s not recommended to use a vacuum cleaner to clean the drain pump filter. The suction from the vacuum cleaner can damage the filter.