Diy Bissell Vacuum Tank Cleaning: Easy Hacks To Remove Dirt And Debris

Maintaining a clean vacuum tank is crucial for optimal vacuum performance and longevity. A dirty tank can hinder suction, reduce efficiency, and even damage the vacuum. This comprehensive guide will provide you with step-by-step instructions on how to clean your Bissell vacuum tank, ensuring your vacuum operates smoothly and effectively.

Materials You’ll Need

• Bissell vacuum cleaner
• Empty trash can
• Soft cloth or microfiber towel
• Warm water
• Mild dish soap (optional)

Step-by-Step Cleaning Instructions

1. Empty the Tank

• Disconnect the vacuum from the power source.
• Locate the tank release lever or button.
• Press the lever or button to release the tank.
• Empty the contents of the tank into an empty trash can.

2. Remove the Filter (if applicable)

• If your Bissell vacuum has a removable filter, locate and remove it.
• The filter is typically located inside the tank or on the bottom of the vacuum.
• Rinse the filter under warm water until the water runs clear.

3. Clean the Tank

• Use a soft cloth or microfiber towel to wipe down the inside of the tank.
• If necessary, dampen the cloth with warm water and a mild dish soap solution.
• Rinse the tank thoroughly with warm water to remove any soap residue.

4. Clean the Filter (if applicable)

• If you removed the filter, allow it to dry completely before reinserting it.
• Once dry, tap the filter gently to remove any loose dirt or debris.

5. Reassemble the Tank

• Reinsert the filter into the tank (if applicable).
• Place the tank back on the vacuum cleaner and secure it using the release lever or button.

6. Clean the Exterior

• Wipe down the exterior of the vacuum cleaner with a damp cloth to remove any dust or debris.
• Use a soft brush or attachment to clean any crevices or hard-to-reach areas.

Additional Tips

• Clean the vacuum tank regularly, especially after vacuuming heavily soiled areas.
• If the tank becomes particularly dirty, you may need to soak it in a mild dish soap solution for 10-15 minutes before cleaning.
• Allow the tank and filter to dry completely before reassembling the vacuum.
• Replace the filter regularly to maintain optimal suction and prevent damage to the vacuum.

Troubleshooting

If your Bissell vacuum is still not performing optimally after cleaning the tank, consider the following troubleshooting tips:

• Check for any clogs or blockages in the hose or attachments.
• Inspect the belt for wear or damage.
• Contact Bissell customer support for further assistance.

Wrapping Up

Cleaning your Bissell vacuum tank is a simple and essential maintenance task that will extend the life of your vacuum and ensure it performs optimally. By following the steps outlined in this guide, you can keep your vacuum running smoothly and effectively, leaving your home spotless.

Answers to Your Questions

Q: How often should I clean my Bissell vacuum tank?
A: Clean the tank regularly, especially after vacuuming heavily soiled areas.

Q: Can I use a vacuum cleaner to clean the tank?
A: No, it is not recommended to use a vacuum cleaner to clean the tank.

Q: What can I do if my vacuum is still not performing well after cleaning the tank?
A: Check for any clogs or blockages in the hose or attachments, inspect the belt, or contact Bissell customer support.