Step-By-Step Instructions: How To Clean An Asko Dishwasher Pump

A clogged or dirty dishwasher pump can significantly impact the performance of your Asko dishwasher. Regular cleaning and unclogging of the pump are essential to ensure optimal operation and prevent costly repairs. This comprehensive guide will provide you with step-by-step instructions on how to clean an Asko dishwasher pump effectively.

Gather Necessary Tools and Materials

Before starting the cleaning process, gather the following tools and materials:

• Phillips screwdriver
• Flathead screwdriver
• Dish soap or dishwasher cleaner
• Vinegar
• Baking soda
• Clean rags or towels

Inspect and Locate the Pump

1. Unplug the dishwasher: Safety first! Always unplug the dishwasher before performing any maintenance or repairs.
2. Remove the dishwasher’s kickplate: Locate the kickplate at the bottom front of the dishwasher and remove it by unscrewing the screws holding it in place.
3. Identify the pump: The pump is typically located at the bottom of the dishwasher, towards the back. It is usually a cylindrical or rectangular-shaped component with wires attached to it.

Disassemble the Pump

1. Disconnect the wires: Carefully disconnect the wires from the pump. Take note of the wiring configuration for reassembly.
2. Remove the screws: Use a Phillips screwdriver to remove the screws that hold the pump in place.
3. Pull out the pump: Gently pull the pump out of the dishwasher.

Clean the Pump

1. Remove debris: Inspect the pump for any visible debris or food particles. Use a flathead screwdriver or tweezers to remove any large pieces of debris.
2. Create a cleaning solution: Mix equal parts dish soap or dishwasher cleaner with warm water in a bowl.
3. Soak the pump: Submerge the pump in the cleaning solution and let it soak for 15-30 minutes.
4. Scrub the pump: Use a clean rag or toothbrush to scrub the pump thoroughly, removing any dirt or grime.
5. Rinse the pump: Rinse the pump thoroughly with clean water to remove any remaining cleaning solution.

Clean the Drain Hose

1. Disconnect the drain hose: Locate the drain hose connected to the pump. Use a flathead screwdriver to loosen the hose clamp and disconnect the hose.
2. Inspect the hose: Check the drain hose for any clogs or blockages. Use a flashlight to inspect the interior of the hose.
3. Flush the hose: Pour a cup of vinegar through the drain hose to flush out any debris or clogs.
4. Reattach the drain hose: Connect the drain hose back to the pump and tighten the hose clamp securely.

Reassemble the Pump

1. Insert the pump: Carefully insert the pump back into the dishwasher.
2. Tighten the screws: Use a Phillips screwdriver to tighten the screws that hold the pump in place.
3. Connect the wires: Reconnect the wires to the pump, ensuring the correct wiring configuration.

Test the Dishwasher

1. Plug in the dishwasher: Reconnect the dishwasher to the power outlet.
2. Run a test cycle: Start a short wash cycle to test the dishwasher’s operation and ensure the pump is working correctly.

Preventative Maintenance Tips

To prevent future pump clogs and maintain optimal dishwasher performance:

• Clean the dishwasher filter regularly: Remove and clean the dishwasher filter after each wash cycle.
• Use a dishwasher cleaner: Run a dishwasher cleaner monthly to remove limescale and mineral buildup.
• Avoid overloading the dishwasher: Overloading the dishwasher can put strain on the pump and cause it to clog.
• Check the drain hose periodically: Inspect the drain hose for any kinks or blockages.

Wrapping Up: Maintaining a Clean Asko Dishwasher Pump

By following the steps outlined in this guide, you can effectively clean your Asko dishwasher pump and restore its optimal functionality. Regular cleaning and preventative maintenance will extend the lifespan of your dishwasher and ensure sparkling clean dishes.

Basics You Wanted To Know

Q: How often should I clean my Asko dishwasher pump?
A: It is recommended to clean your dishwasher pump every 3-6 months or as needed if you notice any signs of clogging or reduced performance.

Q: Can I use bleach to clean my dishwasher pump?
A: No, bleach is not recommended for cleaning dishwasher pumps. It can damage the pump and its components.

Q: What if the pump is still clogged after cleaning?
A: If the pump remains clogged after cleaning, it may be necessary to replace it. Contact an authorized Asko repair technician for assistance.