Troubleshoot Your Ge Washer Drain Issues: How To Check The Pump

A malfunctioning drain pump can leave your GE washer unable to complete its cycle, resulting in a frustrating and inconvenient situation. If you suspect an issue with your washer’s drain pump, it’s crucial to check it promptly to identify and resolve the problem. This comprehensive guide will provide you with step-by-step instructions on how to check the GE washer drain pump, empowering you to diagnose and fix the issue efficiently.

Identifying the Drain Pump

Before you begin checking the drain pump, it’s essential to locate it within your GE washer. Typically, the drain pump is situated at the bottom of the washer, behind the front panel. To access the drain pump, you’ll need to remove the front panel by unscrewing the screws that hold it in place.

Visual Inspection

Once you have access to the drain pump, perform a thorough visual inspection. Look for any obvious signs of damage, such as cracks, leaks, or loose connections. If you notice any damage, it’s likely that the drain pump will need to be replaced.

Checking for Power

To ensure that the drain pump is receiving power, use a multimeter to test the voltage at the pump’s terminals. If you do not detect any voltage, the problem may lie in the power supply or the wiring connecting the pump.

Testing the Impeller

The impeller is a crucial component of the drain pump that rotates to move water out of the washer. To check the impeller, gently rotate it by hand. If it moves freely without any obstruction, the impeller is likely functioning correctly. However, if the impeller is stuck or difficult to rotate, it may need to be cleaned or replaced.

Inspecting the Filter

The drain pump filter is designed to trap debris and prevent it from clogging the pump. Over time, the filter can become clogged, which can hinder the drain pump’s performance. To check the filter, remove it from the drain pump and inspect it for any debris or blockages. Clean the filter thoroughly and reinstall it.

Checking the Drain Hose

The drain hose is responsible for carrying wastewater away from the washer. A kinked, clogged, or damaged drain hose can prevent water from draining properly. Inspect the drain hose for any kinks or blockages. If you find any obstructions, clear them and ensure that the hose is not kinked.

Replacing the Drain Pump

If you have checked all the components mentioned above and still cannot resolve the issue, it’s possible that the drain pump needs to be replaced. To replace the drain pump, disconnect the power to the washer and remove the front panel. Disconnect the hoses and wires connected to the drain pump and remove the mounting screws. Install the new drain pump by reversing these steps.

Final Note: Resolving Your GE Washer Drain Pump Issues

By following the steps outlined in this guide, you can effectively check the drain pump in your GE washer and identify any underlying issues. Whether it’s a clogged filter, a damaged impeller, or a faulty pump, you can now troubleshoot and resolve the problem with confidence. Remember, regular maintenance and timely repairs can help extend the lifespan of your GE washer and keep it functioning optimally.

Frequently Discussed Topics

1. What are the signs of a faulty drain pump in a GE washer?

• Washer fails to drain water
• Unusual noises during the drain cycle
• Washer takes longer than normal to drain
• Water leaks from the bottom of the washer

2. How often should I check the drain pump in my GE washer?

• Regularly inspect the drain pump for any signs of damage or blockages.
• Clean the drain pump filter every few months to prevent clogs.

3. Can I replace the drain pump in my GE washer myself?

• Yes, it is possible to replace the drain pump in a GE washer with basic tools and mechanical skills. However, if you are not comfortable performing the repair yourself, it is recommended to contact a qualified appliance repair technician.