Primo Power: Master The Art Of Water Dispenser Assembly With Our Expert Guide

Assembling a Primo water dispenser is a straightforward task that can be completed in a matter of minutes. By following these step-by-step instructions, you can ensure your dispenser is properly set up and ready to provide you with fresh, filtered water.

Unboxing and Preparation

1. Unpack the Dispenser: Carefully remove the dispenser from its packaging and place it on a flat, stable surface.
2. Gather Tools: You will need a Phillips head screwdriver and a pair of pliers (optional).
3. Identify Parts: Verify that you have all the necessary parts, including the dispenser base, reservoir, water tank, and spigot.

Base Assembly

1. Attach the Base Legs: Align the base legs with the holes on the bottom of the dispenser base. Secure them with the provided screws using a Phillips head screwdriver.
2. Install the Drip Tray: Insert the drip tray into the designated slot at the front of the base.

Reservoir Installation

1. Position the Reservoir: Lift the reservoir and align it with the guides on the dispenser base. Slide it into place until it clicks into position.
2. Tighten the Reservoir: Use a pair of pliers to gently tighten the two screws on the sides of the reservoir. This will prevent it from moving or leaking.

Water Tank Placement

1. Insert the Water Tank: Take the water tank and align it with the opening on the top of the reservoir.
2. Press Down: Push down on the tank until it fits snugly into place. You may hear a clicking sound.

Spigot Assembly

1. Attach the Spigot: Insert the spigot into the designated hole on the front of the dispenser.
2. Secure the Spigot: Tighten the spigot nut using a pair of pliers. Ensure it is securely fastened to prevent leaks.

Initial Setup

1. Fill the Water Tank: Remove the water tank and fill it with cold tap water.
2. Replace the Tank: Reinsert the filled water tank into the dispenser.
3. Prime the System: Press the spigot several times to remove any air from the system and start the water flow.

Finishing Touches

1. Adjust the Temperature: If your dispenser has a temperature control feature, adjust the dial to your desired setting.
2. Check for Leaks: Inspect the dispenser for any leaks around the base, reservoir, or spigot. Tighten any loose connections if necessary.

Questions We Hear a Lot

Q: Can I use distilled water in my Primo water dispenser?
A: Yes, you can use distilled water in your dispenser. However, it is not recommended as it can damage the dispenser over time.

Q: How often should I clean my Primo water dispenser?
A: It is recommended to clean your dispenser every 2-3 months to prevent bacteria buildup.

Q: What is the warranty on a Primo water dispenser?
A: Primo water dispensers typically come with a one-year limited warranty.

Q: Can I use my Primo water dispenser without a water tank?
A: No, the water tank is essential for the dispenser to function properly.

Q: How do I troubleshoot a leaking Primo water dispenser?
A: Check for loose connections around the reservoir, water tank, or spigot. Tighten any loose parts and replace any damaged components if necessary.