Diy Masterclass: How To Discover The Secret Maytag Washer Filter In 5 Easy Steps

Maytag washers are renowned for their reliability and efficiency. But when it comes to maintenance, one common question that arises is: “Does Maytag washer have a filter?” In this comprehensive guide, we’ll delve into the intricacies of Maytag washer filters, exploring their types, locations, and maintenance requirements.

Types of Maytag Washer Filters

Maytag washers can have two types of filters:

1. Drain Filter: Located at the bottom of the washer, this filter traps lint, hair, and other debris that can clog the drain hose.
2. Inlet Filter: Found on the water inlet hose, this filter prevents sediment and particles from entering the washer and damaging its components.

Location of Maytag Washer Filters

Drain Filter:

• For top-load Maytag washers, the drain filter is typically located in the center of the agitator or behind a small access panel at the bottom front of the washer.
• For front-load Maytag washers, the drain filter is usually located behind a small door at the bottom right-hand corner of the washer.

Inlet Filter:

• The inlet filter is located where the water inlet hose connects to the back of the washer.

How Often Should Maytag Washer Filters Be Cleaned?

• Drain Filter: Clean the drain filter every 1-2 months, or more frequently if the washer is used heavily.
• Inlet Filter: Clean the inlet filter every 6-12 months, or as needed if the water pressure seems low.

Step-by-Step Guide to Cleaning Maytag Washer Filters

Drain Filter:

1. Unplug the washer and turn off the water supply.
2. Locate the drain filter and remove it by unscrewing or pulling it out.
3. Rinse the filter under running water to remove any debris.
4. Reinsert the filter and tighten it securely.

Inlet Filter:

1. Turn off the water supply to the washer.
2. Disconnect the water inlet hose from the back of the washer.
3. Remove the inlet filter from the hose by pulling it out.
4. Rinse the filter under running water to remove any debris.
5. Reinsert the filter into the hose and reconnect the hose to the washer.

Signs of a Clogged Maytag Washer Filter

• Slow draining
• Reduced water pressure
• Unusual noises during the wash cycle
• Error codes related to water flow

Benefits of Cleaning Maytag Washer Filters

• Prevents clogs and improves drainage
• Extends the life of the washer
• Reduces energy consumption
• Improves wash performance

Troubleshooting Common Maytag Washer Filter Issues

• Drain filter won’t come out: If the drain filter is stuck, try using a pair of pliers or a screwdriver to gently pry it out.
• Inlet filter is clogged with hard water deposits: Soak the filter in a solution of vinegar and water for several hours before rinsing it.
• Water still leaking after cleaning the drain filter: Check for leaks in the drain hose or around the drain pump.

Wrapping Up

Understanding the types, locations, and maintenance requirements of Maytag washer filters is crucial for ensuring optimal performance and longevity of your washer. By regularly cleaning the filters, you can prevent clogs, improve water flow, and extend the lifespan of your appliance.

Quick Answers to Your FAQs

Q: How often should I clean the Maytag washer drain filter?
A: Every 1-2 months, or more frequently if the washer is used heavily.

Q: Where is the drain filter located on a top-load Maytag washer?
A: In the center of the agitator or behind a small access panel at the bottom front of the washer.

Q: Can I use a vacuum cleaner to clean the Maytag washer drain filter?
A: No, vacuum cleaners can damage the filter. Rinse it under running water instead.

Q: What are the signs of a clogged Maytag washer inlet filter?
A: Reduced water pressure, slow draining, or unusual noises during the wash cycle.

Q: How do I clean the Maytag washer inlet filter?
A: Turn off the water supply, disconnect the water inlet hose, and remove the filter from the hose. Rinse it under running water and reinsert it.